|
|
Over the Counter Permit
(Roofing, Electrical, Plumbing, Mechanical) |
| Repair in Kind Less than 10% |
Request a Building Inspection
Once you have received your building permit, you may submit a request to have your structure inspected. |
Check Building or Discretionary Application Status
You can check the status of your discretionary or building application here. Click on
any underlined field for a detailed explanation of the meaning of the field. You will
need your Assessor's Parcel Number (APN) and your application number. |
Planning Information (GIS) Interactive Map
Use this site to view Zoning and General Plan maps and over two dozen other layers of mapped
information used in the permitting and planning process. Click the APN SEARCH button and type
in an Assessor's Parcel Number to zoom directly to your parcel. |
File a Code Complaint
Report violations, unsafe or unpermitted structures. The identity of anyone reporting code
violations is kept confidential and is protected under California government code section 6250 ET. SEQ.
|
|
|
|
|
|
|
Owner/Agent Approval Form
For persons other than the owner who wish to obtain a building, development and/or other permit,
the approval of the owner is required. |
| Request an Application Extension |
| Request a Permit Extentsion |
Accessible Parking and Path of travel Verication forms
Before a rough framing, plumbing, electrical, and/or mechanical
inspection can be approved, and prior to the placement of any paving materials in the accessible parking area(s) or accessible path(s) of travel,
a surveyor or civil engineer licensed by the State of California shall complete the form. |
Documentation of Unreasonable Hardship (Accessibility)
For use when an unreasonable hardship exists and
that compliance with an accessible building standard would make the specific work of the project unfeasible. |
Statement of Special Inspections
- effective January 1, 2008 |
Special Inspection and Testing Agreement
- for applications applied for after January 1, 2008
For permit applicants of projects requiring a special inspection and/or testing per Uniform Building Code 1701.5.
For applications applied for prior to January 1, 2008, use this form:
Special Inspection and Testing Agreement |
Recognized Special Inspection and Testing Agencies
Only agencies selected from the following list will be approved.
|
Civil Engineering transfer of Responsibility form
To be completed upon replacing a Civil Engineer during the course of the project or application. |
Engineering Geologist transfer of Responsibility form
To be completed upon replacing an Engineer Geologist / Soils Engineer during the course of the project or application.
|
Request for Planning Staff services.
This form is to be used for limited pre-application services to be performed by Planning Department staff. Such services must be discussed with and agreed to by the involved staff member in advance of completing this form |
|
|
|
